[Shotimes] More Bearing fun
Steve Tatro
stevetatro@att.net
Thu, 22 May 2003 14:06:07 -0400
There's no write-up because there are so very few who have ever changed
them!
Seriously, from those that have inspected them it appears they wear at a
rate less than half that of the rod bearings, so they should be good
until at least you need rod bearings again.
Those that have inspected them have definitely NOT removed trannies or
subframes, FYI.
Good luck.
Steve Tatro
Red/Black '93 with 167k miles
Cincinnati, Ohio
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of kevin galuska
Sent: Thursday, May 22, 2003 1:16 PM
To: shotimes@autox.team.net
Subject: [Shotimes] More Bearing fun
Now my question is about the main bearings. I have the 95 ford cd and
was
looking up directions for replacing the main bearings but the directions
want you to remove the transmission and subframe and such. Is this
really
necessary or is there a simpler way to do it? Also is their a write up
on
the web anyplace?
Kevin "Im Helpless" Galuska
ksg132@psu.edu
'91 SHO white/black
14.7 @ 95.32 .575RT http://www.klimesgroup.com/lshoc/lshoc/kevigalu.htm
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes