[Shotimes] Replaced much of front end... still get **CRUNCH**

[Ron Porter]

Don't launch at such a high rpm!!

I would always get that on occasion with the SHO with a stock suspension,
but the Eibach SHOs I have, with both Konis and Tokicos, have not had the
issue. I believe that it is inherent to any driven axles that have CV joints
(as opposed to a solid axle).

Ron Porter

-----Original Message-----
From: Your Name [mailto:sho@crued.net] 
Sent: Tuesday, November 18, 2003 9:33 AM
To: Ron Porter; 'sho @ crued.net'; shotimes@autox.team.net
Subject: RE: [Shotimes] Replaced much of front end... still get **CRUNCH**


Oh, another symptom that I'm having is really bad wheel hop... What 
would this point to?



> SHO Nut carries most, probably all, of that stuff.
> 
> http://www.shonutperformance.com/
> 
> Ron Porter
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-
admin@autox.team.net]
> On Behalf Of sho @ crued.net
> Sent: Monday, November 17, 2003 10:32 PM
> To: shotimes@autox.team.net
> Subject: RE: [Shotimes] Replaced much of front end... still get 
**CRUNCH**
> 
> 
> Anybody got part numbers for all this stuff?
> 
> subframe bushings, bolts
> swaybar bushings (brackets/bolts?)
> swaybar endlinks
> 
> Thanks..
> 
> 
> 
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
> > [mailto:shotimes-admin@autox.team.net]On Behalf Of Ron Porter
> > Sent: Monday, November 17, 2003 8:50 AM
> > To: shotimes@autox.team.net
> > Subject: RE: [Shotimes] Replaced much of front end... still get
> > **CRUNCH**
> >
> >
> > And also replace the front swaybar end links.
> >
> > Ron Porter
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net [mailto:shotimes-
admin@autox.team.net]
> > On Behalf Of John J. Weidenbenner
> > Sent: Monday, November 17, 2003 9:30 AM
> > To: sho @ crued.net; shotimes@autox.team.net
> > Subject: Re: [Shotimes] Replaced much of front end... still get 
**CRUNCH**
> >
> >
> > Check your subframe mount bushings.
> >
> > John W.
> >
> > ----- Original Message -----
> > From: "sho @ crued.net" <sho@crued.net>
> > To: <shotimes@autox.team.net>
> > Sent: Monday, November 17, 2003 8:17 AM
> > Subject: [Shotimes] Replaced much of front end... still get 
**CRUNCH**
> >
> >
> > > I've replaced just about every suspension component there is and 
when I
> > take
> > > hard turns (made worse over bumps), I still get this loud
> > *CRUNCH* noise.
> > > Here's what I have replaced
> > >
> > > Front Struts and Strut bearings
> > > Lower control arms (with ball joints)
> > > Both halfshafts
> > > both tierod ends
> > >
> > > I have no idea where to look next.
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 
> 
> 
> 

--