[Shotimes] Cam question...swap thereof

[Frank "SHOrage" Costa]

Hello, I was planning on putting in a 3.2 in my sho and i now have a
completely disassembled 3.0.....and a 3.2 with heads in place and cams
removed....

Can i theoretically just swap all of the cam works? Such as the cam, shims,
and all that straight to the 3.2 heads without worrying about a valve
adjustment? I have had the 3.0 adjusted right before it came out of the car.
The 3.0 heads are still whole but without valve cover and removed from the
block.

I want to do the cheapest 3.2 transplant....

Should i

A) Remove the 3.2 heads (which are still in place untouched without cams)..and
swap the whole head from the 3.0 or

B) Remove the cams from the 3.0 heads ( which are removed from the motor but
cams in place) and put those on the 3.2 heads which are still on the block
untouched...

Just wondering what the gurus think....

Frank Costa and the "Silver Bullet" soon to be a 3.2 with short shifter
89 Titanium Grey

MODS-
Dynomax Catback With Super Turbo Mufflers
Monroe Sensatrack Struts
Moog Cargo Coils All Around
Updated Front Swaybar Endlinks
Polyurethane Rear Swaybar Endlinks
Solid Delrin Subframe Bushings
Directional Italian SLicers
Bridgestone HP50 Tires All Around
Subframe Connectors
Rod Shifter
Performance (RACTIVE) Shift Knob [ Good For 25 HP]

http://www.brothersofmetal.org/frank.html