[Shotimes] Cam question...swap thereof

[Frank "SHOrage" Costa]

Can i reuse the cam bearings from the 3.2 then? how much are cam bearings 
for these suckers?


Frank



----- Original Message ----- 
From: "bjshov8" <bjshov8@comcast.net>
To: "1 SHOTIMES" <shotimes@autox.team.net>
Sent: Sunday, December 05, 2004 1:52 AM
Subject: Re: [Shotimes] Cam question...swap thereof


> It will probably not work.  The valve seats in the heads, the valves
> themselves, the buckets, the shims, the cams, the cam journals- all add up
> to determine the valve clearances.  If you change any one of those 
> elements
> you can throw off the valve adjustment- especially if you move a cam to a
> new set of valves.  Now you might just get real lucky but I would suspect
> that you will have to change some or all of the shims.
>
>
>> Can i theoretically just swap all of the cam works? Such as the cam,
> shims,
>> and all that straight to the 3.2 heads without worrying about a valve
>> adjustment?
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes