[Shotimes] 94 ATX no start, thoughts/suggestions?

[Alan Fanning]

According to a comment Nick Chrimes made to me a week or so ago, the IRCM
has to be the EXACT same p/n to work. Not sure of his source for this
information, but he concluded this was the case subsequent to borrowing a
module from me. 

Any luck trying to run a KOEO test?

    Alan

> I'm now looking at the IRMC (if that is the correct term for the relay box
> under the emissions cover panel on the radiator support) I swaped that with
> the one off my 94 MTX, and still nothing. Part numbers are the same except
> that my 94 had a F3D* and the one off thier ATX 94 had F1D* as the prefix.
> I've also checked every fuse on the car, cause they thought it might have
> been a fuse and I wanted to set that one to rest.

> snip>
 
> Thanks in advance
> 
> Bruce