[Shotimes] 94 ATX no start, thoughts/suggestions?

[Kirk Doucette]

IRMC Intake Runner Manifold control

You guys are talking about the CCRM

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Alan Fanning
Sent: Sunday, February 15, 2004 10:58 AM
To: SHOtimes
Subject: Re: [Shotimes] 94 ATX no start, thoughts/suggestions?

According to a comment Nick Chrimes made to me a week or so ago, the IRCM
has to be the EXACT same p/n to work. Not sure of his source for this
information, but he concluded this was the case subsequent to borrowing a
module from me.

Any luck trying to run a KOEO test?

    Alan

> I'm now looking at the IRMC (if that is the correct term for the relay box
> under the emissions cover panel on the radiator support) I swaped that
with
> the one off my 94 MTX, and still nothing. Part numbers are the same except
> that my 94 had a F3D* and the one off thier ATX 94 had F1D* as the prefix.
> I've also checked every fuse on the car, cause they thought it might have
> been a fuse and I wanted to set that one to rest.

> snip>

> Thanks in advance
>
> Bruce
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes