[Shotimes] ABS

[Kevin & Cheryl Airth]

I have never got this to work either? Maybe corrosion in the connector?
.
.



> Can't get there from here.  Or at least I couldn't anyways.
>
>
> Mike Wojton
> Toledo, Ohio
>
> > Here you go.
> >
> > http://prochilo.myserver.org:2080/abs_codes.html
> > -- 
> > Cheers,
> > Carl Prochilo
> > 1992 Ultra Red Crimson
> >
> > Paul L Fisher said:
> > > Really? That is the 1st time I had heard that. Why isn't it written up
> > > somewhere? Which pins? I had seen that connector but I was always
> under the
> > > impression that you needed a scan tool.
> > >
> > >
> > > Paul L Fisher
> > >
> > > Yes.  There is a red Anti-Lock test connector back up against the
> middle of
> > > the firewall.  You can jumper two pins, and then go into the car and
> put the
> > > ignition in the run position, to count the blinking lights similar to
> what's
> > > done for the engine codes.  I believe you have a service manual and
> that
> > > also contains the codes.  In my experience, the first code is usually
> the
> > > one to focus on.  Remember that once you drive over 25MPH without a
> fault
> > > condition present, the controller will clear out the codes.
> > > --
> > > Cheers,
> > > Carl Prochilo
> > > 1992 Ultra Red Crimson