[Shotimes] ShoShop's equal lenght Y-pipe
Paul L Fisher
sho@paul-fisher.com
Tue, 11 May 2004 15:47:14 -0500
I have never bought anything from the SHO Shop but have seen enough
anecdotal evidence of their poor customer service that I would not use them.
In addition, their HP gain #'s for their mods are a little suspect.
According to them, all my mods on my '93 should of bump my HP by at least 30
HP. I'd bet I had 10 at the most.
In addition, they preach the pinning is the only way and bad mouth welding.
They still say it is the only Ford approved way when everyone knows the only
Ford approved way is Locktite. Also, when cam failures started they 'talked
to someone in Japan' and determined that a batch of bad cams was the problem
and no more than 300 cams were involved.
Paul L Fisher
1999 Ford Taurus SHO TR 65K - Stock. Kirk'ed.
Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Jason Hartberger
Sent: Tuesday, May 11, 2004 3:27 PM
To: Paul L Fisher; cmichaelo@optonline.net; 'shotimes'
Subject: Re: [Shotimes] ShoShop's equal lenght Y-pipe
Ok... quick question from the newbie: why is there so much hatin' bein'
heaped on the Sho Shop? I'm just curious... and please, for the love of God,
reasons! not page-long rants! I *know* how some of you *cough george cough*
like to go off on these huge rants when somebody touches something you're
sensitive about....
Jason
----- Original Message -----
From: "Paul L Fisher" <sho@paul-fisher.com>
To: <cmichaelo@optonline.net>; "'shotimes'" <shotimes@autox.team.net>
Sent: Monday, May 10, 2004 5:23 PM
Subject: RE: [Shotimes] ShoShop's equal lenght Y-pipe
> Why would anyone ever buy anything from the SHO Shop?
>
>
> Paul L Fisher
>
> 1999 Ford Taurus SHO TR 65K - Stock. Kirk'ed.
>
> Visit my website: http://www.paul-fisher.com
> SHOClub Member: http://www.shoclub.com
> Amsoil dealer: http://www.paul-fisher.com/oil
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of cmichaelo@optonline.net
> Sent: Monday, May 10, 2004 3:57 PM
> To: shotimes
> Subject: [Shotimes] ShoShop's equal lenght Y-pipe
>
> Hi,
>
> Is any of you using SS's new equal lenght Y-pipe?
>
> I just noticed it in the new SS Guidelog. They also increased the output
of
> the Y-pipe to 2.5" piping. It used to be 2.25".
>
> Michael Olsen
> 94MTX,green,BOS+
>
> [demime 0.99d.1 removed an attachment of type text/x-vcard which had a
name
> of cmichaelo.vcf; charset=windows-1252]
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes