[Shotimes] ShoShop's equal lenght Y-pipe

[Jason Hartberger]

Damn sneaky russkies...

----- Original Message ----- 
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "'Jason Hartberger'" <at3hartberger@mail.com>; "'shotimes'"
<shotimes@autox.team.net>
Sent: Tuesday, May 11, 2004 4:47 PM
Subject: RE: [Shotimes] ShoShop's equal lenght Y-pipe


> I have never bought anything from the SHO Shop but have seen enough
> anecdotal evidence of their poor customer service that I would not use
them.
>
>
> In addition, their HP gain #'s for their mods are a little suspect.
> According to them, all my mods on my '93 should of bump my HP by at least
30
> HP. I'd bet I had 10 at the most.
>
> In addition, they preach the pinning is the only way and bad mouth
welding.
> They still say it is the only Ford approved way when everyone knows the
only
> Ford approved way is Locktite. Also, when cam failures started they
'talked
> to someone in Japan' and determined that a batch of bad cams was the
problem
> and no more than 300 cams were involved.
>
> Paul L Fisher
>
> 1999 Ford Taurus SHO TR 65K - Stock. Kirk'ed.
>
> Visit my website: http://www.paul-fisher.com
> SHOClub Member: http://www.shoclub.com
> Amsoil dealer: http://www.paul-fisher.com/oil
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Jason Hartberger
> Sent: Tuesday, May 11, 2004 3:27 PM
> To: Paul L Fisher; cmichaelo@optonline.net; 'shotimes'
> Subject: Re: [Shotimes] ShoShop's equal lenght Y-pipe
>
> Ok... quick question from the newbie: why is there so much hatin' bein'
> heaped on the Sho Shop? I'm just curious... and please, for the love of
God,
> reasons! not page-long rants! I *know* how some of you *cough george
cough*
> like to go off on these huge rants when somebody touches something you're
> sensitive about....
>
> Jason
>
> ----- Original Message ----- 
> From: "Paul L Fisher" <sho@paul-fisher.com>
> To: <cmichaelo@optonline.net>; "'shotimes'" <shotimes@autox.team.net>
> Sent: Monday, May 10, 2004 5:23 PM
> Subject: RE: [Shotimes] ShoShop's equal lenght Y-pipe
>
>
> > Why would anyone ever buy anything from the SHO Shop?
> >
> >
> > Paul L Fisher
> >
> > 1999 Ford Taurus SHO TR 65K - Stock. Kirk'ed.
> >
> > Visit my website: http://www.paul-fisher.com
> > SHOClub Member: http://www.shoclub.com
> > Amsoil dealer: http://www.paul-fisher.com/oil
> >
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> > On Behalf Of cmichaelo@optonline.net
> > Sent: Monday, May 10, 2004 3:57 PM
> > To: shotimes
> > Subject: [Shotimes] ShoShop's equal lenght Y-pipe
> >
> > Hi,
> >
> > Is any of you using SS's new equal lenght Y-pipe?
> >
> > I just noticed it in the new SS Guidelog. They also increased the output
> of
> > the Y-pipe to 2.5" piping. It used to be 2.25".
> >
> > Michael Olsen
> > 94MTX,green,BOS+
> >
> > [demime 0.99d.1 removed an attachment of type text/x-vcard which had a
> name
> > of cmichaelo.vcf; charset=windows-1252]
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes