[Shotimes] upgrading bulbs in headlights

[Paul Nimz]

I know the GEN 2s have 16 ga wire for the OEM wiring, and my '91 Festiva has 
14 ga, Gen 3s are down to 18 ga.  Still the relay system will take the 
entire load off of the OEM system and let the relays carry the load.  The 
headlight switch will not carry any significant load.  As Larry said if you 
want maximum performance from any bulb then the 100W harness is the way to 
go.  Easy to install and not very expensive.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: <SHOWHAT9@aol.com>
To: <shotimes@autox.team.net>
Sent: Sunday, November 07, 2004 1:52 AM
Subject: Re: [Shotimes] upgrading bulbs in headlights


> In a message dated 11/6/2004 7:47:56 PM Central Standard Time,
> mmucher@bellsouth.net writes:
> Larry, etc.
>
> Let me ax a stupid question...
>
> Do Silverstars even need an upgraded harness?  If not, do they perform
> better/brighter with one?
>
> I'm talking specifically about first gens here.
>
> BTW, Advance/Discount Auto Parts has them for $30 a pair before a $5 
> rebate.
>
> Thanks,
> No, the silverstars do not require a harness. However to get the maximum
> potential from the bulbs, or for that matter any bulb including stock, it 
> is,
> IMHO, the best money you will spend on a mod that really matters.
>
> Larry Eck
> 97TR
> Mods
> Welds
> Occassional Webmaster
> Cam Failure #425
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes