[Shotimes] Codes 176 & 214
Mike Bruce
shoitoff@verizon.net
Mon, 29 Nov 2004 21:48:40 -0500
http://www.superhighoutput.com/gallery/data/media/1/cam_sensor_rotor.JPG
http://www.superhighoutput.com/gallery/data/media/1/cam_sensor_cap.JPG
Here's what I found when I removed the Cam sensor. I cleaned everything
with Simple Green and reinstalled the cap. I figured it couldn't hurt
to clean up the mess. We'll see if the car will start tomorrow morning.
Thanks for the help everyone!!
Steve-
Thanks for offering, but I'm quite happy with my demo. I just need to
be a little more careful with my clock settings.
Mike Bruce
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Jason Hartberger
Sent: Monday, November 29, 2004 3:15 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] Codes 176 & 214
and yet, both the "from" field and the three words directly below this
post list your last name... and pffff... I have so many pirated things
it's not even funny... :-|
Jason "H"
Steve Tatro wrote:
>That's sad. You want a full copy of 2002 (or even 2004)?
>
>Please, nobody turn me in to Autodesk.
>
>For safety I'm not signing this using my whole name. Go ahead, try to
find me.
>
>Steve T.
>Red/Black '93 with 180k miles
>Monroe, Ohio.
>
>
>On Sun, 28 Nov 2004 20:44:58 -0500, Mike Bruce <shoitoff@verizon.net>
wrote:
>
>
>>What are you talking about? The year is 1997, The Spice Girls are at
>>the top of their game, and the president's a Demi-crat. Yeah, I know
>>I'm living in the past. I had to set the computer back so that my
copy
>>of AutoCAD 2002 would function. It's a demo copy that expired a year
or
>>so ago.
>>
>>Thanks for catching that. This message should have the correct date.
>>
>>Do you think it would help if I were to take the sensor off the car,
>>clean the rotor and magnet housing, and reinstall. I don't want to
have
>>to put new parts on a car with a leaky cam seal. Otherwise, I'll just
>>continue driving the car as it is until the next batch of +20 cams is
>>made.
>>
>>
>>
>>Mike Bruce
>>
>>-----Original Message-----
>>From: shotimes-admin@autox.team.net
>>[mailto:shotimes-admin@autox.team.net] On Behalf Of Jason Hartberger
>>Sent: Sunday, November 28, 2004 7:22 PM
>>To: shotimes@autox.team.net
>>Cc: Mike Bruce
>>Subject: Re: [Shotimes] Codes 176 & 214
>>
>>are you aware that your computer thinks it's 1997? all the posts I get
>>from you are dated 1997, and turn up at the bottom of the stack... my
>>messages are sorted by date...
>>
>>Jason
>>
>>Mike Bruce wrote:
>>
>>
>>
>>>Hey all!
>>>
>>>Within the past few weeks (since the weather has gotten colder), my
93
>>>ATX has started showing the CEL. While driving normally, under 2/3
>>>throttle, I get no light. I do get a light for a couple minutes
after
>>>spirited driving. Usually, the light appears about 5 to 10 seconds
>>>after resuming a safe, sane, driving style. I can get the light on
the
>>>freeway, and twisty back roads. All that seems to matter is that the
>>>secondaries are open.
>>>
>>>After pulling codes, I get 176(left bank o2 sensor lean), and 214(CID
>>>circuit failure). I get the same codes after resetting the computer
>>>
>>>
>>and
>>
>>
>>>driving for a few days.
>>>
>>>The car is a SHOshop stage 2 car with a Dynomax cat-back. I have a
>>>
>>>
>>D4U1
>>
>>
>>>with a generically tuned LPM. Both o2 sensors have less than 3 years
>>>
>>>
>>on
>>
>>
>>>them. I have not noticed any loss of power or any other problems.
If
>>>it weren't for the light, I would think the car was operating
>>>perfectly(aside from the leaky cam seal). I plan on replacing the
cam
>>>seals when I install +20 cams. Speaking of the leaky cam seal, which
I
>>>think may be the one on the cam position sensor, could the leak be
>>>fouling the CID sensor and setting the code?
>>>
>>>About the 176 code. I know the chip is not set perfectly for my car
>>>
>>>
>>and
>>
>>
>>>will need to be tuned after cams. Would it be possible that a poor
>>>
>>>
>>tune
>>
>>
>>>would cause an erratic A/F ratio coming off load to set a code and
>>>illuminate the CEL?
>>>
>>>If you've read all that, thank you. I eagerly anticipate your
replies.
>>>
>>>Mike Bruce
>>>93 ATX
>>>_______________________________________________
>>>Shotimes mailing list
>>>Shotimes@autox.team.net
>>>http://www.team.net/mailman/listinfo/shotimes
>>>
>>>
>>_______________________________________________
>>Shotimes mailing list
>>Shotimes@autox.team.net
>>http://www.team.net/mailman/listinfo/shotimes
>>_______________________________________________
>>Shotimes mailing list
>>Shotimes@autox.team.net
>>http://www.team.net/mailman/listinfo/shotimes
>>
>>
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes