[Shotimes] L0S PCM?

[Paul Nimz]

Driver smiver....


A driver is code that runs a piece of hardware.  Your problem is a bad on 
board relay.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Adam Parrott" <parrotta@usa.net>
To: <shotimes@autox.team.net>
Sent: Friday, October 08, 2004 6:46 PM
Subject: Re: [Shotimes] L0S PCM?


> Agreed with Jim and Mark.  A TwEECer will not be able to correct or even
> work around a physical (electrical) problem like a bad/bum driver (which 
> is
> most likely the cause of your secondaries problem with the L0S).
>
> OTOH, a dead PCM also makes a fashionable paperweight.  ;)
>
> Adam
>
>
> ----- Original Message ----- 
> From: "Jim and Debbie Leyden" <jndleyden@comcast.net>
> To: "'Shotimes'" <shotimes@autox.team.net>
> Sent: Friday, October 08, 2004 6:20 PM
> Subject: RE: [Shotimes] L0S PCM?
>
>
> Sounds like a hardware problem, most likely a blown output driver.
>
> Make a good Frisbee!
>
> Jim
>
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Ron Porter
> Sent: Friday, October 08, 2004 2:13 AM
> To: Shotimes
> Subject: RE: [Shotimes] L0S PCM?
>
>
> Can the twEECer board correct a bad circuit that runs the secondaries? 
> This
> PCM doesn't feed the 12v to the green wire at idle, it sits at about 
> .7-.8v
> all the time, not only after 4K like it's supposed to.
>
> Ron Porter
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Mark Nunnally
> Sent: Thursday, October 07, 2004 11:07 PM
> To: shotimes@autox.team.net
> Subject: Re: [Shotimes] L0S PCM?
>
>
> 91
>
> with the twEECer board, you can run the X2J program on any year computer 
> :)
>
> mark
>
> ----- Original Message ----- 
> From: "Ron Porter" <ronporter@prodigy.net>
> To: "Shotimes" <shotimes@autox.team.net>
> Sent: Thursday, October 07, 2004 11:03 PM
> Subject: [Shotimes] L0S PCM?
>
>
>> Anyone know what year MTX had the L0S PCM? I know it wasn't '89 (B9,
>> or something like that), and not the later Gen 2s with the X2J.
>>
>> FWIW, I had bought a spare X2J from Justin Shick in the chance that
>> was the problem with my inop secondaries. Well, turns out that was it.
>> The car is now back to it's ass-kickin' BOS-equipped self.
>>
>> Anyway, I got a surprise when I wrestled out what I thought was the
>> original X2J. Turned out to be a reman L0S. Original owner was doing the
>> "dyno-tune via USPS" with Vadim when he installed the BOS back in the
>> '90s, so I suspect this got swapped somewhere along the line.
>>
>> Ron Porter
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes