[Shotimes] L0S PCM?

[Tom Teixeira]

At 8:58 PM -0500 10/8/04, Paul Nimz wrote:
>Driver smiver....
>
>
>A driver is code that runs a piece of hardware.  Your problem is a 
>bad on board relay.
>
>Paul Nimz
>'97 TR
>'93 EG mtx

For hardware types, a driver is something that takes a low current 
signal and converts it to a high current. So a relay is one type of 
driver. But there are several possible drivers that could be bad: a 
driver on the chip itself that sends the signal to an output pin; a 
transistor or separate small amplifier on the module that sends the 
signal from the output pin to  a longer wire; or a relay somewhere 
(like the CCRM) that sends voltage to something like the fuel pump.

-- 
Tom Teixeira		mailto:tjteixeira@earthlink.net
Blue 94 5-speed 127K	http://world.std.com/~tjt