[Shotimes] Help with engine stumble in 95 MTX

[Zach Leahy]

I know it will run at least 2 teeth out on the cams.  I experimented
advancing mine a bit and decided that it was right exactly where it
was.

Z

On 8/10/05, Ron Porter <ronporter@prodigy.net> wrote:
> Thinking out loud.........
> 
> A question for those who may have done it, but if the timing belt was
> incorrectly installed with too much advance, would the car run? Usually
> advancing cam timing will help the bottom end, at the expense of top-end
> power.
> 
> Ron Porter
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Joe DeLaurentis
> Sent: Tuesday, August 09, 2005 10:08 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] Help with engine stumble in 95 MTX
> 
> Group
> ok here goes, I just bought my 4th SHO, a White 95 MTX
> 
> Now my problem is in 1st gear when i hit say 4500 rpms the motor feels like
> it loses power and i have a mack truck
> being pulled from behind.. I also notice if i shift at 4 grand and punch it
> in second i get the same no power feeling
> I can here the secondaries open up but then it falls on her face..
> 
> I'm not getting a check engine light..
> Where can I start.. I know the wires and plugs and gaskets were done less
> then a year ago, So was the CPS and timimg belt..
> 
> Joe
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes