[Shotimes] Vibration or picky...again

[George Fourchy]

On Mon, 14 Feb 2005 23:03:46 -0500, cmichaelo@optonline.net wrote:

>This time the vibration is in the steering wheel.
>
>Does that mean the wheel is going from side to side? 

Not impossible.....but....

Are you absotively posilutely sure there isn't out of round type runout?  Did you
use the "put it in reverse and watch the tread to see if it wobbles" routine?  All
it takes is a 32nd of an inch or so to cause an imbalance approaching the equivalent
of one ounce static imbalance.

If the rotating mass is balanced....you say you have done that....and the wheel is
centered (exactly!!!!!!!!!) on the hub, there will be (WILL BE) no vibration.

George