[Shotimes] Re: Clutch

[Dave]

Is that pressure plate stamped or cast iron? Stamped is going to be 
pretty thin and and that is the 9.25 cast will be about an inch thick 
where the bolts go in and that is 9.75. I had the same problem at advance.
Dave

Barry Hayes wrote:

> OK so I bought the clutch from Advance. When I got there I asked about 
> the 9.25 vs 9.75 and was told thqt this wqws a 9.25 unit. That is what 
> th4e book listed as stock. The larger unit was over $500.00. So we 
> talked back & forth and eventualy found that the book lists both sizes 
> with the same part #! Finaly measured the unit and itis a 9.75 inch 
> unit. WHEW!
> So now, is there anybody out there wiling to help me install this 
> thing? I live in Vermont, I am VERY low on money, and I have   no 
> driveway or garage of my own. It needs doing though, because even 
> fully pedal depressed the car creeps and it is almost impossible to 
> shift unless i manage to double clutch and time the move just right. 
> Heelp me out folks. email me direct if you can help.
>
> thanks
>
> Barry Hayes
>
> It's all in the mind you know- George Harrison
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes

[demime 1.01d removed an attachment of type text/x-vcard which had a name of showerks.vcf]