[Shotimes] Quaife install question

[Bob]

I would stick the shim to a block and thin it out using some 1000/1500 grit
wet/dry sandpaper taped to a piece of glass.  You will need a micrometer,
but it sounds like you have one.

	-- Bob

> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Robert Bruce
> Sent: Saturday, November 05, 2005 4:16 AM
> To: TechSHO@topica.com
> Cc: shotimes@autox.team.net
> Subject: [Shotimes] Quaife install question
>
>
> I am just completing a transmission rebuild and Quaife
> installation.  I measure a .035" gap with my new differential and the Ford
> gauge tools.  The old shim from this transmission is a .037".
> What size should I order/install?  Can I safely use the .037 shim to
> get a .002" preload?  Should I order a .035" shim for zero preload?
>
> Bob Bruce
> 92 w/ a mod or two
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes