[Tigers] Clutch problem

[Smit, Theo]

Maybe your fulcrum mount in the bellhousing is loose or the release lever has shifted or worn to the point where it’s not working consistently?
A similar problem could occur with the linkage under the dash – check that first because it’s way easier to get to and you can see what’s going on there.

Other than that – I’d say it might be a hydraulic problem like an air bubble that sometimes gets in the line and sometimes not… check your fluid level and maybe bleed the system, look for gunk or contaminated fluid.

Theo

PS: Best of luck to Rick on his recovery!


________________________________

CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of the intended recipient(s) and contain information that may be Garmin confidential and/or Garmin legally privileged. If you have received this email in error, please notify the sender by reply email and delete the message. Any disclosure, copying, distribution or use of this communication (including attachments) by someone other than the intended recipient is prohibited. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20161013/5a3826ce/attachment-0001.html>