[Zmagnette] Gas tank photo

[wraylemke at compuserve.com]

Arch, I haven't been following the thread but I have run across both types of tank. My original tank in the ZB has the pickup like you describe, next to the filler neck. I pulled a tank out of a parts car, it had the pickup with the banjo bolt in the center of the tank.

I don't know how you would fix the pickup that is next to the filler neck. If I get a bit of time, I'll stick the snake camera down inside that tank and see if I can get a pic of the interior.

Wray



-----Original Message-----
From: Arch Boston <arch.boston at twc.com>
To: List for the Z Magnette Group - North America <zmagnette at autox.team.net>
Sent: Tue, Dec 3, 2013 9:39 pm
Subject: [Zmagnette] Gas tank photo


This is the way the parts book says the gas tank should be set up.  However, my 
agnette doesn't have the banjo nut on the top of the tank for gas line.  My 
ank has a rubber hose located approx 1 1/2 inches under the large rubber filler 
ube for gas line that goes to the fuel pump.  This afternoon I replaced the 
uel pump ( which was a waste of time and energy).  Disconnecting the fuel line 
rom tank should have spilled out a bit of gas.  Nothing.  Blowing into gas line 
 could hear air entering gas tank....  Filter not clogged ( if there is one).  
o....  The pickup tube in the tank must be loose/goofed up.  Has anyone 
eplaced/ repaired this pickup?  Hate to go in completely blind.  Arch

ttp://1.bp.blogspot.com/-fLg6x6Q8Qk0/UdR7VQ9MbYI/AAAAAAAADIs/ecq6w4bKdGk/s640/2013-07-02+Magnette+gas+tank+refurbish+017+

ent from my iPad
______________________________________________
magnette mailing list
Donate: http://www.team.net/donate.html
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/wraylemke@compuserve.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20131204/ce795463/attachment.html>