-------------------------------------------------------------------------------
To: alpines(at)autox.team.net
From: "Bert Clewits" <nyclewit(at)nyhp03.serigate.philips.nl>
Subject: fixed caliper bolt
Cc:
-------------------------------------------------------------------------------
Thanks for the comments,
No the bolt isn't welded anywhere.
I'll try to do the following:
Put the car on a car bridge to have better access use the internal 6 sided box
spanner with with a longer extension bar.
Then with one guy pulling the bar one hammering with sledge hammer as near to the
bolt as possible and heating the bolt with a welder flame and hammering the top
of it should work.
If not I'll have to remove the stub axle completely and get the bolt drilled
out in a machine shop.
I let you know.
Regards, Bert
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:21:04 CDT