You wrote:
>
>After rebuilding my engine and finally getting it started, the valve
rockers
>seem to be a little funky. When tighten the rocker supports to spec,
the
>rockers are too tight and the valves remain open slightly. Right now,
I
>don't have any washers at the bottom the rocker supports - there
weren't any
>when I took the engine apart.
>
>Any insight is appreciated...
>
>Don
>
>Series V which is now running again...
>
What do you mean by too tight. Not enough valve clearence, or rockers
are stiff on the shafts.
John
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:24:28 CDT