Ramon and Holbay Co.,
If TWM can make some adjustments, I would suggest:
1. some sort of reinforced mounting spots to attach linkeage to,
whether it be for cable (as I have used) or mechanical.
2. an additional reinforced vacuum port. Mine came with one. So, I
can only run either my servo or the PCV, but not both. Granted, neither
may be necessary, but the option would be best.
3. the flange of the intake manifold that mounts to the head is thinner
than the flange of the exhaust manifold. So, you must do one of two
things, file down the exhaust or create a stepped washer to fill the
gap. It was explained to me that the reason it was thinner was because
most performance exhaust manifolds are the thinner size. This may be
true, but no one has such an exhaust manifold on the shelf, and filing
down the cast exhaust was not easy.
Jay Laifman
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:24:43 CDT