Tuning the Series V

From: Karl Gilchrist (xtr25618701(at)xtra.co.nz)
Date: Fri Mar 28 1997 - 01:40:16 CST

Next message: DSand95510(at)aol.com: "Re: Ring Gear Bolts"
Previous message: Karl Gilchrist: "Aluminuim/Iron Heads"
Next in thread: DSand95510(at)aol.com: "Re: Tuning the Series V"
Maybe reply: DSand95510(at)aol.com: "Re: Tuning the Series V"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I'm about to get my Series V tuned. The shop that is doing it are very
experienced and race prepare a lot of local cars. Unfortunately they
havn't got a lot of experience with twin Strombergs. Is there any thing
I should tell them that would make the job easier (other than fitting
webers!). Any tips out there for maximising the performance of these
finicky carbs.Thanks

Karl

Next message: DSand95510(at)aol.com: "Re: Ring Gear Bolts"
Previous message: Karl Gilchrist: "Aluminuim/Iron Heads"
Next in thread: DSand95510(at)aol.com: "Re: Tuning the Series V"
Maybe reply: DSand95510(at)aol.com: "Re: Tuning the Series V"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:37:11 CDT