Christopher Albers wrote:
> <snip>I went to a glass shop and had a new piece cut for
> about $8. I painted it first and then replaced the rivets in back.
> <snip>
Just a note-- to save yourself the grief of re-doing this project, make
sure that you seal the cut edge of the glass where the silver backing is
applied. This will prevent (mostly) the ugly black edges of discoloration
from creeping in toward the center of the mirror. Stained glass supply
shops have a special "paint" for this, but I would think that anything that
seals it would be ok.
Gary
Michigan
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:55:42 CDT