Jan,
I believe the metal part of the gasket and the dimpled ridge should
go out toward the manifolds to protect the gasket material from the
extreme heat of the factory exhaust pipe. On the hose it depends if
you have the stock S1 water pump or have change it to the S2-4 water
pump. I can't help you on that except to say go to a good parts house
and they have pictures of hoses, lengths, and diameters. You might get
lucky. If you have changed to a later series pump this also involves
getting the later water pump pulley, then the hose that fits is a
NAPA number 7795. This hose will also fit the upper fittings on your
S1 with some triming. Hope this helps.
Dave Green
Owner of 3 S1 Alpines plus a few others!
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:21:44 CDT