I took off the front bumper and was replacing the mounting bolts on the car
when I noticed I had a problem. One of the nuts that is just above the jack
slots came off and is stuck inside the "frame". It seems that it should be
welded in place to prevent this. The metal (where the hole for the bolt is)
wraps around to cover the tube and appears to be welded to the other side,
which means I can't reach the nut to put it in place. Am I going to have to
play welder to get it out or otherwise in place? If I start moving the car
without securing this nut it will probably be lost (and clanking) forever.
I hope this is a clear description.
Tim Beloney
VAR Development Manager
Wyse Technology
www.wyse.com
tbeloney(at)wyse.com <mailto:tbeloney(at)wyse.com>
510.749.9432 (phone)
510.714.2067 (cell/pgr)
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:36:34 CDT