Tim,
I had this problem on my car. A welder cut off the front metal cover and
replaced it with a suitable sized cover with a nut welded on the back of
it.
Brad
Timothy Beloney wrote:
>
> I took off the front bumper and was replacing the mounting bolts on the car
> when I noticed I had a problem. One of the nuts that is just above the jack
> slots came off and is stuck inside the "frame". It seems that it should be
> welded in place to prevent this. The metal (where the hole for the bolt is)
> wraps around to cover the tube and appears to be welded to the other side,
> which means I can't reach the nut to put it in place. Am I going to have to
> play welder to get it out or otherwise in place? If I start moving the car
> without securing this nut it will probably be lost (and clanking) forever.
>
> I hope this is a clear description.
>
> Tim Beloney
> VAR Development Manager
> Wyse Technology
> www.wyse.com
> tbeloney(at)wyse.com <mailto:tbeloney(at)wyse.com>
> 510.749.9432 (phone)
> 510.714.2067 (cell/pgr)
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:39:26 CDT