I think it requires a 1 5/16in Deepwell Socket due to the crank chuck
that extends out from the bolt. Am I right on the size of the socket
required? This is a difficult socket to find cheaply. Sears has a
large deepwell set for $87.00 made by Ingersol/Rand...I haven't checked
with the
--------------
I have found that a 34mm socket works nicely. $15.00 at Auto Zone.
It's handy for turning the engine too.
Rob Nanzig
67SV
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:55:33 CDT