Hey , Jay I'll come set on your bumper, I think that would be pretty close(to
breaking down your front end) 300 lbs/pds.
~(8=)
chuck
Jay Laifman wrote:
> I guess today's the day for realizing mistakes. I previously reported that
> the 1725 Workshop Manual has a large gap guage that is supposed to measure
> the gap between the top of the bottom A-arm and the bottom of the edges of
> the metal stop for the rubber snubber above. This gap is supposed to be
> measured with 300 pounds hanging off the front on the bumper. So, my
> measurement of 3.25" at that gap without that 300 pounds is largely
> usesless.
>
> Jay
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:45:01 CDT