Gordon's right-
his numbers are better than the factory,
and toe should be
on the order of 1/8" toe-in.
You'll be happier.
Toby
-------------- Original message ----------------------
From: "Gordon Glasgow" <gsglasgow@comcast.net>
> I recommend NOT using the factory settings for camber and caster (stock
>toe-in
> is okay).
>
> Camber: 1 degree negative
> Caster: 2.5 degrees positive.
>
> The other specs you list (min turning radius, angle of inclination of swivel
> axle, etc) are determined by the geometry of the suspension components and
>are
> not adjustable. Don't worry about them.
|