fot
[Top] [All Lists]

Re: Wheels?

To: Bob Lang <LANG@isis.mit.edu>
Subject: Re: Wheels?
From: Joe Curry <spitlist@gte.net>
Date: Mon, 14 Aug 2000 09:23:27 +0000
Rain Tires?  What's that?????  :)

Joe (C) in sunny AZ



Bob Lang wrote:
> 
> On Mon, 14 Aug 2000, Matthew Wilder wrote:
> 
> > Hi,
> 
> Hello.
> 
> >   Since I recently got my but kicked at a divisional Solo 2 when it
> > rained and I was the only one left on slicks, I'm thinking I need a set
> > of wheels for rain tires.
> 
> Ironically, I was just looking at those results. I had to miss the event
> due to tow-vehicle problems (since repaired) - but had I been there,
> there would have been _three_ six swilinder big TR's, as another peron in
> the division showed up with a TR250... but I digress.
> 
> Hmmm, that explains it... were the FP cars in the same run group as the
> EP cars???
> 
> > Rather then spend $800 for another set of
> > Panasports I was wondering what size the TR250 and TR6 wheels are?
> 
> 15 x 5.5 inch. The bolt parrtern is 4 on 4.5 inch circle. Zero offset.
> 
> > (offsets, etc) I should be able to find a set somewhere. (laborday at
> > Limerock anyone?)  Then I'd just need to find tires to fit them.
> 
> Just for yucks, you might try looking at a set of Diamond wheels, they're
> steel, but not rediculously heavy and rather cheap at $50 or $60 each. I
> think this is what FOTer Dean van de Carr is using.
> 
> > Matt W.
> > '67 TR4a E-prepared auto-xer (slippery when wet!)
> 
> Oh yeah!
> 
> rml
> p.s. my plan is to mount a set of some sort of rain tire on a set of
> spare mags that I have... need some money for the tires, though. Maybe
> next year.
> p.p.s. I'd be interested in knowing what folks on the list are using for
> rains...
> 
>-------------------------------------------------------------------------------
> Bob Lang                Room N42-140Q          | This space for rent.
> Consultant              MIT Computer Services  |
> Voice: (617)253-7438    FAX: (617)258-9535     |
> 
>-------------------------------------------------------------------------------

<Prev in Thread] Current Thread [Next in Thread>