WEmery7451@aol.com wrote:
>If I remember correctly, Jack Wheeler was using Centerline Wheels with
a
>three inch offset for his IRS TR-4. He was using only 1/4 inch spacer
plates to
>reach the maximum allowable track.
I don't know if this helps, but when I got that car in '98 he was using
7/8" spacers on the rear with the Centerline wheels, which are 7" rims
with a 3 1/8" backspace. For comparison, I have a set of 7" Panasports
with zero offset and they measure at 3 3/4" backspace. I believe the
front spacers were 1/2" inch but it had Tilton hubs set up for Jag
brakes so I can't say how that would compare to stock. Don
|