fot
[Top] [All Lists]

Re: FOT Project Pulley

To: BillB@bnj.com, triumph_marx@freenet.de, fot@autox.team.net
Subject: Re: FOT Project Pulley
From: WEmery7451@aol.com
Date: Sat, 26 Mar 2005 10:39:03 EST
In a message dated 3/26/05 7:01:12 AM Pacific Standard Time, BillB@bnj.com 
writes:

<<  As I recall,
 someone said they put a pressure gauge on the block and it was as high as 50
 pounds. I don't understand exactly how that happens since the radiator and
 cap are on the outlet of the pump. Seems like block pressure should be lower
 than radiator pressure. The radiator constitutes a big pressure drop. Inlet
 pressure can't be more than 16 pounds because that's where the radiator cap
 is.  >>

Looking at the diagram in the shop manual, it appears to me that the radiator 
pressure should be lower than the block pressure.  The pump is pulling 
coolant from the bottom of the radiator and pumping it to the block.  There is 
a 
pressure drop in the block and through the thermostat, or the restrictor 
washer, 
and the flow diversion of the thermostat housing.  Of course, you have a 
modified cooling system.  I use a 16 psi cap, as I have seen almost everyone 
else 
use.

<Prev in Thread] Current Thread [Next in Thread>