On Thu, Mar 11, 2010 at 1:44 PM, Kas Kastner <kaskas@cox.net> wrote:
> ---- riverside <riverside@southslope.net> wrote:
>
> One note on the stainless braided line. Check the routing as anything it
> rubs against it will slowly ground away or through including aluminum
> castings and plastic parts.
> A bit of shrink tube over the hose at the chaff points fixes it though.
>
If your stainless line is already assembled on the car, and you don't want
to disassemble to install shrink tube, you can make a nice hose cover with
the inner tube from a bicycle tire and some wire wraps.
Irv
_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|