Good point. I'm going to check the workshop manual schematic and see what
it shows and also Ryan's street TR4 and see what it has in it.
Tim
From: Tim Pettenati [mailto:pettenat@pacbell.net]
Sent: Monday, June 20, 2011 9:51 PM
To: Tim Murphy
Cc: fot@autox.team.net
Subject: Re: [Fot] Blackhawk Farms, Success with some problems
The Lucas Sport is designed to be used without a ballast resistor. The
originals TR4 must have been designed to be used with a 1.5 ohm ballast.
Tim
_____
From: Tim Murphy <timmurph@fastbytes.com>
One last point, I just measured a standard TR4 coil primary resistance and
it is 1.5 ohms. The 3 or 4 Lucas Sport coils I've measured are all about
3.0 ohms. I don't understand that either.
Tim
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|