Chris,
If the other brands have remained dry? Sounds like the seats on the A-1
units are NOT uniform. Replace it. Only way to cure an issue with an
irregular seat etc.
Cheers....
"You can Make a Small Fortune From Motor Racing. As long as You Started With
A Lage Fortune!"
Kind Regards
Peter Vucinic
TR4 - TR7 V8 - Spitfir MkII
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of MadMarx
Sent: Thursday, 1 January 2015 4:28 AM
To: 'Diesel Performance Parts - Info'
Cc: fot@autox.team.net
Subject: Re: [Fot] Aluminum connectors
The ones which do leak are from A-1 performance plumbing.
I also have some more bought of another brand which are seal and dust dry.
And with the dry sump tank sitting high a lot of oil is leaving the hoses
after a while.
Like a lake district.
-----Urspr|ngliche Nachricht-----
Von: Diesel Performance Parts - Info
[mailto:info@dieselperformanceparts.com]
Gesendet: Mittwoch, 31. Dezember 2014 16:39
An: 'MadMarx'
Cc: 'fot@autox.team.net'
Betreff: RE: [Fot] Aluminum connectors
I bet since they are new they are not galling but at the same time I have
had them sort of hang up when tightening them. Drop a drop of the same oil
you use in the engine on the threads and also in the inside of the fittings
where they spin on themselves to seal. Not the 37 degree angle of the
fitting where they seal but back inside where the cap and or nut spins on
the fitting. That keeps them from trying to bind when you tighten them and
if you have the correct fitting mating with the correct matching male/female
ends they will not leak.
What brand fittings are these??? Are you sure they are the correct ends to
mate together as there are other degree of angle ends other than the common
37 degree ones we all typically use. If you got some different ones mixed
together they will leak.
Mark Craig
Diesel Performance Parts, INC.
411 Allied Drive
Nashville, TN 37211
866-455-7788 Phone
615-834-9923 Fax
www.dieselperformanceparts.com
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of MadMarx
Sent: Wednesday, December 31, 2014 8:30 AM
To: 'Jim Gray'; fot@autox.team.net
Subject: Re: [Fot] Aluminum connectors
The oils seeps through the taper.
When I opened the packet with the connectors there were no o-rings supplied.
Is this an extra order?
Chris
-----Urspr|ngliche Nachricht-----
Von: Jim Gray [mailto:toodamnfunky@comcast.net]
Gesendet: Mittwoch, 31. Dezember 2014 15:25
An: 'MadMarx'; fot@autox.team.net
Betreff: RE: [Fot] Aluminum connectors
Chris,
Some fittings are made to use a rubber o-ring. My sandwich plate AN fittings
will leak without the o-rings, Is it the flared side that leaks or is it the
non-flared side ?
jim g
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of MadMarx
Sent: Wednesday, December 31, 2014 4:45 AM
To: fot@autox.team.net
Subject: [Fot] Aluminum connectors
Hi @ all,
hope you are getting well to the next year.
My car has many oil lines and also a lot of aluminum connectors and some of
the them do leak.
Is there any trick to seal them?
I think that I have tighten them enough and hesitate to tighten more not to
destroy them.
Is there a seal missing in those connectors?
http://ecx.images-amazon.com/images/I/41P918-F13L.jpg
Just an example what I mean for the system.
Cheers
Chris
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/info@dieselperformanceparts.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|
