Nope. Trying to follow along per the buckeye article. He recommended removing
the rear housing while the OD is still attached. My next try will be to remove
the whole unit unless I have an aha moment and figure out what's going on.
Pics of my situation.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 1007968 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20171224/37e1eb71/attachment-0003.jpe>
-------------- next part --------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.JPG
Type: image/jpeg
Size: 1441571 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20171224/37e1eb71/attachment-0004.jpe>
-------------- next part --------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3.JPG
Type: image/jpeg
Size: 883951 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20171224/37e1eb71/attachment-0005.jpe>
-------------- next part --------------
Sent from my iPhone
> On Dec 24, 2017, at 8:31 AM, Jerry Van Vlack <jerryvv at roadrunner.com>
> wrote:
>
> Have you removed the entire OD from the Transmission or are you just trying
> to remove the rear housing while the main OD case is still attached to the
> transmission?
>
> -----Original Message----- From: Greg Blake via Fot
> Sent: Sunday, December 24, 2017 8:23 AM
> To: EDWARD WOODS
> Cc: Greg Blake via Fot
> Subject: Re: [Fot] TR type A OD
>
> I actually have that printed and on the workbench. It is an excellent article.
>
> I've included a picture below for where I got stuck. Reading it again this
> morning, maybe the brake ring is trying to come out with the rear housing?
> With only a 1/4" gap, how does one drive the brake ring back into the main
> housing?
>
>
>
>
>
>
>
>
>
> Sent from my iPhone
>
>> On Dec 24, 2017, at 6:59 AM, EDWARD WOODS <fogbro1 at comcast.net> wrote:
>>
>> Greg,
>>
>> You're not using the excellent article on the A type overdrive found on the
>> Buckeye Triumphs technical site.
>>
>> Ed Woods
>>> On December 23, 2017 at 10:50 PM Greg Blake via Fot <fot at autox.team.net>
>>> wrote:
>>>
>>>
>>> I am attempting to rebuild an A type OD over the holiday weekend. I tried
>>> to separate the rear OD housing from the main OD housing after removing the
>>> rear output flange and speedo drive. Once i removed the 6 nuts and washers,
>>> I had to tap the studs with a brass drift to get the rear housing to
>>> separate from the main housing. But now i can't get the rear OD housing to
>>> come completely off. I can get about a 1/4" gap between the rear and main
>>> housing but it won't come all the way off. What am I doing wrong?
>>>
>>> Thanks. Greg
>>>
>>> Sent from my iPhone
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fogbro1 at
>>> comcast.net
>>>
>>>
>
>
>
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jerryvv at
> roadrunner.com
>
>
|