Doug,
I was not that smart. My shop is 40 x 60 or 2400 sq. ft. and the house is
1760 sq. ft.. That causes some static in my ears occasionally.
Howard Nafzger
----- Original Message -----
From: "Doug Odom" <popms@thegrid.net>
To: "Jim Dincau" <jdincau@qnet.com>
Cc: "W S Potter" <wester6935@attbi.com>; <BWANA343@aol.com>;
<land-speed@autox.team.net>
Sent: Wednesday, September 18, 2002 10:21 PM
Subject: Re: Shop size
> I tried to be fair. The house is 2200 sq.ft. so I made the shop
2100 sq.
> ft.
> Doug Odom in big ditch
>
> Jim Dincau wrote:
>
> > I snipped out most of Wes's note
> >
> > > If these guys are like my brother-in-law, he was going to have a
"barn"
> > > built on his rural property. The 40X40 was 80% of the price of the
40X60
> > so
> > > you can guess which was built. Racers are NOT dumb.
> > >
> >
> > When I started construction of the shop my wife says how big is it going
to
> > be? I said about 20 by 20, she says I can't visualize that scratch some
> > lines in the dirt! When she saw what I had outlined she says "that's way
too
> > small make it at least twice that size" . I've told you all before she's
a
> > keeper.
> > Jim in Palmdale
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|