land-speed
[Top] [All Lists]

RE: Laser Ignition / cam profiles

To: "Dave Dahlgren" <ddahlgren@snet.net>,
Subject: RE: Laser Ignition / cam profiles
From: "Albaugh, Neil" <albaugh_neil@ti.com>
Date: Wed, 23 Feb 2005 15:48:12 -0600
Dave;

Laser Q-switches usually use Kel-F as a high- voltage insulation.

Regards, Neil    Tucson, AZ


-----Original Message-----
From: owner-land-speed@autox.team.net
[mailto:owner-land-speed@autox.team.net] On Behalf Of Dave Dahlgren
Sent: Wednesday, February 23, 2005 2:10 PM
To: Joe & Lynne Lance; wester6935@comcast.net; Keith Turk; DrMayf; Bryan
Savage; List Land Speed
Subject: RE: Laser Ignition / cam profiles

What would you suggest for a dielectric for 80k volts that is only
around
3/16 thick. Them plug wells in a hemi are not all that big so air won't
help
much..
Dave






<Prev in Thread] Current Thread [Next in Thread>