land-speed
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Bad TIG bubbles

from [Skip Higginbotham] [Permanent Link][Original]
To: "atrav" <atrav@copper.net>,"LSR list" <land-speed@autox.team.net>
Subject: Re: Bad TIG bubbles
From: Skip Higginbotham <saltrat@pahrump.com>
Date: Sun, 04 Feb 2007 21:09:53 -0800 
Aron,
I have run into the same problem. Turned out to be bad steel. There 
were occlusions in the steel itself. Once I ground out the occlusions 
it welded just fine. I find this problem in Mexican steel quite 
often. The other option is get new steel and start over.
Skip




At 06:19 PM 2/4/2007, atrav wrote:
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: Bad TIG bubbles, ddahlgren
Next by Date:  Tig bubbles, Larry McAfee
Previous by Thread:  RE: Bad TIG bubbles, ddahlgren
Next by Thread:  Re: Bad TIG bubbles, Joe Timney
Indexes:  [Date] [Thread] [Top] [All Lists]