mgb-v8
[Top] [All Lists]

RE: FW: Heater valve

To: "'James J.'" <m1garand@speakeasy.net>
Subject: RE: FW: Heater valve
From: "Jim Stuart" <vze3swyy@verizon.net>
Date: Mon, 27 Oct 2003 00:18:56 -0500
Cc: "'Mgbv8 List \(E-mail\)'" <MGB-V8@autox.team.net>
In-reply-to: <3F9CA0E1.2080304@speakeasy.net>
Reply-to: "Jim Stuart" <vze3swyy@verizon.net>
Sender: owner-mgb-v8@autox.team.net
Yes, they work off manifold vacuum. That is why you need an electric switch
of sorts & a vacuum motor to control the vacuum to turn the valve on or off.

And yes, some of the A/C controls are electric (& expensive).


Jim Stuart

Reply to <jimbb88@usa.com>




-----Original Message-----
From: owner-mgb-v8@autox.team.net [mailto:owner-mgb-v8@autox.team.net]On
Behalf Of James J.
Sent: Sunday, October 26, 2003 11:37 PM
To: Jim Stuart
Cc: Mgbv8 List (E-mail)
Subject: Re: FW: Heater valve


Some of the A/C ones are electric too.  But don't the vacuum ones work
from manifold vacuum?  Or do all domestic cars have a separate vacuum
pump to run the 'HVAC' system?  I admit I don't know.

In particular, though, what Dodge van and what part number are we
looking for?
Thanks
JJJ


Jim Stuart wrote:

>-----Original Message-----
>From: Jim Stuart [mailto:vze3swyy@verizon.net]
>Sent: Sunday, October 26, 2003 10:40 PM
>To: 'James J.'; 'Barrie Robinson'
>Cc: 'mgs@autox.team.net'; 'mgb-v8@autox.team.net'
>Subject: RE: Heater valve
>
>
>The heater valves found in A/C kits work very well, but they are vacuum
>operate, not cable operated as the MG valve is. They can be used, but will
>require an on/off switch & a vacuum motor.
>
>I have used a Dodge valve in the past that was cable operated, & it worked
>very well. I suggest you follow up on Jack Emory's suggestion. Jack has a
>real talent for finding alternatives.
>
>Jim Stuart
>
>Reply to <jimbb88@usa.com>

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>