mgs
[Top] [All Lists]

Re: coolent recovery

To: Gonaj@aol.com
Subject: Re: coolent recovery
From: "James H. Nazarian, Ph.D." <microdoc@apk.net>
Date: Thu, 06 Apr 2000 15:03:34 -0400
George,

What you've written makes sense, as you concluded.... but is based on
disregarding one important fact; there are two kinds of thermostatic radiator
caps: the kind that only burps, and the other kind that burps and gulps. What a
difference a hiccup can make!

Jim

Gonaj@aol.com wrote:

> All of the caps that I recall have a spring between the top of the cap and
> the seal which mates with a flange inside of the filler opening.  This flange
> (seal) is below the overflow and prevents coolant overflow until the pressure
> of the system, as calculated for temp., exceeds it's set point.
>
> In order for the system to be bi-directional the spring must be a bimetallic
> so that it will operate like a thermostat.  All systems must be
> bi-directional regardless of weather they were originally equipped with an
> overflow tank or not.  If they were not bi-directional there could be enough
> vacuum created as to crush the thin walls of the radiator tubing.
>
> Now I will grant you that I am sitting in isolation at 3:30 AM theorizing as
> to the physics of what is happening but I am confident as to my conclusion.
> FWIW
>
> George


<Prev in Thread] Current Thread [Next in Thread>