FlynShoot@aol.com wrote:
>
> I had a weeping at the thermostat gasket. Being a slight
> perfectionist, I needed to fix it (oil spots are the only spots
> allowed on the garage floor).
>
Water spots are easier to clean :-)
>
> I removed the old housing, removed the old gasket, cleaned all
> surfaces until smooth and clean, put a thin bead of Blue permatex on
> the housing, I put a small bead of permatex on the block I lined the
> housing up inserted the bolts and snugged the bolts down in a crossing
> pattern.
>
I can't imagine not using a cork gasket here. I think this would solve
your problem (works for me).
Eric
'68MGB MkII
Adelaide, South Australia
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|