mgs
[Top] [All Lists]

Re: maxed out dwell out 40 degrees?

To: <mgs@autox.team.net>
Subject: Re: maxed out dwell out 40 degrees?
From: "james" <jamesnazarian@netzero.net>
Date: Mon, 29 Apr 2002 21:43:10 -0600
The BOP V8s, and probably the Rovers, have a window that you reach into with
a 1/8th inch Allen key to set dwell.

james
----- Original Message -----
From: Telewest (PH) <paul.hunt1@blueyonder.co.uk>
To: Rick Lindsay <ROLindsay@Emeraldgrc.com>; Dereck C <derex39@hotmail.com>;
<mgs@autox.team.net>
Sent: 29 April, 2002 8:27 AM
Subject: Re: maxed out dwell out 40 degrees?


> The factory V8 has a hex bar sticking out the side of the distributor body
> which is the only way to adjust the points gap.  I have never used gap to
> set the points on that, always dwell.  Ironic, really, since the points
must
> have just about the easiest access you could get.  I just wish the
> 4-cylinder had such a facility, the angle, position and location of the
RHD
> steering makes adjusting the points a real pain, I always remove it and do
> it on the bench.  I also have a test-rig so I can check dwell on the bench
> too before installing.
>
> ----- Original Message -----
> From: "Rick Lindsay" <ROLindsay@Emeraldgrc.com>
> To: "Telewest (PH)" <paul.hunt1@blueyonder.co.uk>; "Dereck C"
> <derex39@hotmail.com>; <mgs@autox.team.net>
> Sent: Monday, April 29, 2002 2:28 PM
> Subject: Re: maxed out dwell out 40 degrees?
>
>
> >    BTW, Chevy (I think it was) had a set-up where a little door on
> > the distributor <cap> could be opened allowing the points to be
> > tweaked with the motor running.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>