[Top] [All Lists]

Re: Crack of doom?

To: "Paul Hunt" <>, "Howard Battan" <>,<>
Subject: Re: Crack of doom?
From: Barrie Robinson <>
Date: Sat, 02 Dec 2006 12:18:03 -0500
Cc: <>
In-reply-to: <016201c71624$0c5095b0$0200a8c0@Three>
References: <000601c7157a$c53cfb90$6600a8c0@XPS410> <016201c71624$0c5095b0$0200a8c0@Three>
Reply-to: Barrie Robinson <>
Sender: owner-mgs@Autox.Team.Net
I think that this does not happen on GT models ??

At 10:03 AM 12/2/2006, Paul Hunt wrote:
There was a BMC (Canada) service bulletin dated *1963* (Rich Chrysler posted me a copy) detailing a mod to cure it. Must have been really severe to have it happen so early. It was a great improvement, but still happened although after a much longer period. My 73 had it when I restored it, and I studied it quite carefully as I didn't want a reoccurrence. I reckoned there was still a weak point and welded in a flange. Some years later I saw a Heritage body with exactly that mod, although as part of the original panels. Whether this occurred before production of the MGB ended, or only with the Heritage shells, I don't know. There are a number of aspects to be considered when trying to prevent it happening again, but I believe the most important is to ensure there is some clearance between the screen uprights and the side of the 1/4-light frame to allow for some 'scuttle shake'. Without that clearance all the scuttle shake (the MGB is pretty good in this respect but there is some over some surfaces) is transferred into the door skin at the window opening.

More details at bodyframe.htm


----- Original Message -----
Is the 'Crack of Doom' common to all MGBs? Is my '79 susceptible, or was it

Barrie Robinson
(705) 721-9060
Your messages not reaching the list?
Check out

=== Help keep Team.Net on the air

=== unsubscribe/change address requests to or try
=== Other lists available at
=== Archives at
=== Edit your replies!

<Prev in Thread] Current Thread [Next in Thread>