A competent locksmith can come right to your house and do the same
thing..
shawn
Hanlon, Bill wrote:
>
> Assuming the ignition key is the same as the door key, pull the driver's
> door keylock mechanism (on some cars this can be done by removing a clip
> on the door jamb and pulling out the lock, on others you have to take the
> inner door panel off to get at the clip that holds the lock) and take the
> door lock to any competent locksmith. They should be able to cut you a
> key from the lock. If not, find a different locksmith.
>
> -----Original Message-----
> From: Rob J. [mailto:rjj0msj@ix.netcom.com]
> Sent: Tuesday, July 06, 1999 11:49 AM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Lost key help! - not OLETRUCK!
>
> I have managed to lose my keys to my 1970 Buick skylark and hope someone can
> offer a suggestion on how to proceed. Since I don't have the key to the
> column ignition switch, I can not unlock the steering wheel or put it in
> neutral. I do have access to the interior though, and can remove the
> steering wheel to get access to the inside of the column. Can I get a key
> made if I don't have the key code number? If not, then I guess the only
> other option is to replace the ignition switch. If this is necessary, can
> this be done without a key (ie. is the key necessary to enable removal of
> the switch)?
>
> While I'm at it, is it possible to have the door key (or door switch)
> modified to allow one key to work both the ignition AND the door locks?
>
> Thanks,
>
> Rob
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|