Ryan. I was hoping to see some answeres on this one myself. I'm probably
six months away from motor and tranny mounts on my '55 1st Series. For what
it is worth, I built a '37 Chevy sedan years ago using Chassis Engineering
parts and was very pleased with them. Harry
----- Original Message -----
From: Ryan Sain <rsain@gte.net>
To: oletrucks <oletrucks@autox.team.net>
Sent: Thursday, July 03, 2003 8:57 AM
Subject: [oletrucks] Motor mount question
> Hi all,
>
> I'll try this again...
>
> We have one last thing to do before the frame goes
> to paint. And that is to fit the motor/tranny.
>
> We have a 283 and would like to use side motor mounts. There are MANY
> sources out there for these - any recommendations?
>
> And a technical question: When using the side mounts, is the motor
> automatically set at the proper slope (front to back)? Or do I need to
> adjust for that when I weld the suckers in place?
>
> TIA
>
> - Ryan
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|