spridgets
[Top] [All Lists]

Re: Fresh air hose

To: Mike Maclean <macleans@earthlink.net>
Subject: Re: Fresh air hose
From: "Peter C." <nosimport@mailbag.com>
Date: Fri, 16 Apr 1999 10:22:45 -0500
Cc: spridgets@autox.team.net
In-reply-to: <3716843E.4C1895B9@earthlink.net>
References: <4.1.19990414142726.0098d770@mailbag.com>
Reply-to: "Peter C." <nosimport@mailbag.com>
Sender: owner-spridgets@autox.team.net
Mike, et al,
        Thanks for that info. I know Motormite very well. Good company. I have
ordered a 5' sample of the stuff I described. I will send it to someone who
"knows". I _do_ know that these people do not sell to Motormite or Manny,
Moe, and Jack or to any of the other automotive places I mentioned. I asked
to avoid redundancy. When it arrives, I'll go compare it with those you've
mentioned.  Not sure of pricing, yet. I'll be in touch.... stay tuned.
(there's something you can't say to SUs)
Peter C

At 07:28 PM 4/15/99 , Mike Maclean wrote:
>Peter,
>    I recently purchased a 4" x 72" black plastic, metal spriral wound Fresh 
>Air
>Hose at the local Pep Boys auto parts store.  It is the most acceptable
>replacement I have ever seen for the Bugeye.  I know the difference because 
>I have
>seen an original on Rob Garofalo's car.
>It is manufactured under the name of Mighty Flow Hoses, a division of:
>     Motormite Mfg.Div. of R&B, Inc.
>     P.O. Box 1800
>     Colmar, PA 18915-1800
>
>It says on the box, "If you can't find a specific hard-to-find part where you
>shop, write to Motormite, Attention: New Product Manager.
>Mike MacLean-60 Sprite
>P.S. They also a make a duct hose very similar to the original metal and paper
>covered demister hoses under the dash.
>
>Peter C. wrote:
>
>> Listers,
>>         Is there currently a good-looking fresh air hose for the early 
>cars? I
>> remember getting one from "what doesn't grow on a rolling stone" and it was
>> paper covered foil. I'm asking because I think I saw a very acceptable
>> replacement. If they are not readily available, I'll need to know length,
>> diameter (4" I think) and spacing of the wire spirals. As I said, I think I
>> found a ready, tho obscure source, just need details.
>> Thanks guys.    Peter C
>
>


<Prev in Thread] Current Thread [Next in Thread>