I left out one detail. I put a washer on each side of the rubber grommet just
to help stability. David, thanks for the "Thanks". First time poster, long
time LBC'er.
Tony
60 Bugeye
69 Lotus Elan SE
-----Original Message-----
From: Lancer7676@aol.com [SMTP:Lancer7676@aol.com]
Sent: Saturday, August 21, 1999 8:54 AM
To: tkwattwo@gdi.net; spridgets@autox.team.net
Subject: Re: Wiper mtr placement
In a message dated 8/20/99 11:09:09 PM Eastern Daylight Time,
tkwattwo@gdi.net writes:
<< space the motor straight up so that it clears the new brake cylinder
mounting. >>
I am also going to replace my single line braking system with a dual line
system in my '67 (If I ever get to that point). I never thought about this
problem, but it sounds like Tony has a great solution. Thanks Tony!
--David
|