Toby wrote.
> 2) The needles in the carbs... I just e-mailed the rebuilder of the carbs to
> see what needles were in there. Maybe some kind of strange really lean top
> end needle or something wacky.
Then Patrick wrote.
> Easy to confirm also. Simply back the mixture nut on both carbs a few full
> turns, causing a really fat idle. If your upper end power comes back, you
> were simply too lean.
And I am writting...
To check rich/lean at top speeds, pull the choke out just a bit at
speed. If things improve, the carbs are too lean. If they get worse, too
rich.
--
Frank Clarici
Toms River, NJ
Down to only 3 Sprites, 1 Midget and an A40 Farina
http://www.exit109.com/~spritenut
|